|
|
huffy47
User
Nov 15, 2012, 8:23 AM
Post #1 of 5
(3903 views)
|
Front Wheel Bearing ????
|
|
|
I have a 1999 KIA sportage that I believe needs a new front wheel bearing. As it seems to have a lot of play in it. How hard is it to change and are their any tourqe specs I need to know? also does any one have a diagram of this so I have a reference to look at. Have a garage and lots of tools so all I need is advice. Thanks guys Huffy47
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 15, 2012, 8:53 AM
Post #2 of 5
(3882 views)
|
|
Re: Front Wheel Bearing ????
|
|
|
Here is a TSB on that.
SOURCE: Kia Technician Times
TITLE: Wheel Bearing Adjustment
APPLIES TO: Sportage
SERVICE TIP:
Whether a vehicle is driven on surface streets, highways, or off-road, front wheel bearing adjustment may loosen up over time, resulting in play which may eventually effect brake wear, 4WD hub engagement (if equipped), seal and bearing life, etc.
If you find excessive play, use the adjusting procedure below after making sure bearings and hub are serviceable. Replace defective parts and/or repack bearings as required.
Remove locking screws and plate (4WD) or straighten staked area on adjusting nut collar(2WD) as required. Using Kia SST K00B-5010-FHB, back off adjusting nut one full turn. "Seat" bearings by torquing adjusting nut to 12 lb-ft while turning the hub or wheel. Loosen the adjusting nut one full turn, then retighten "hand tight". Install lock plate and two attaching screws (4WD) or stake adjusting nut collar (2WD).
NOTE: If threaded holes do not line up with holes in lock plate, loosen adjusting nut just enough to make the holes line up.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
MarineGrunt
Enthusiast
Nov 15, 2012, 11:56 AM
Post #3 of 5
(3867 views)
|
|
Re: Front Wheel Bearing ????
|
|
|
If you go to alldatadiy you can purchase a subscription for you vehicle. I think a one year is $16.95 or you can get 3 years for $29.95. It blows the Haynes manual out of the water. Has great step by step instructions with pictures. With the alldata, and the mechanics on this site, I've yet to have to take my vehicle to a shop. Although, I give most of the credit to the guys here. They have been my lifeline on many projects and have saved my ass many times!
|
|
| |
|
|
huffy47
User
Nov 19, 2012, 5:54 PM
Post #4 of 5
(3837 views)
|
|
Re: Front Wheel Bearing ????
|
|
|
Hammer Time just want to thank you once again for your help the wheel did need anew bearing and everything went just fine thank you for the help Huffy47
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 19, 2012, 5:55 PM
Post #5 of 5
(3832 views)
|
|
Re: Front Wheel Bearing ????
|
|
|
You're welcome.
I'll close this now to keep the spammers out.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
