|
|
broman
New User
Jun 21, 2014, 4:33 PM
Post #1 of 10
(1802 views)
|
my windshield wipers only work when the key is turned back also I have no blinkers at all what could be the problem?
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 21, 2014, 9:45 PM
Post #2 of 10
(1783 views)
|
|
Re: Grand Caravan 98
|
Sign In
|
|
First thought is ignition switch - test for power flow and see what others here have to say as well,
T
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 22, 2014, 2:59 AM
Post #3 of 10
(1770 views)
|
|
Re: Grand Caravan 98
|
Sign In
|
|
Have you made any voltage measurements in those circuits for the wipers and turn signals?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
broman
New User
Jun 22, 2014, 9:29 AM
Post #4 of 10
(1759 views)
|
|
Re: Grand Caravan 98
|
Sign In
|
|
not yet I just replace the ignition lock cylinder and everything went haywire from there thanks for reply how do I check that?
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 22, 2014, 9:40 AM
Post #5 of 10
(1752 views)
|
|
Re: Grand Caravan 98
|
Sign In
|
|
What was your reason for replacing it the first time? Same issues now or new ones?
T
|
|
| |
|
|
broman
New User
Jun 22, 2014, 9:50 AM
Post #6 of 10
(1749 views)
|
|
Re: Grand Caravan 98
|
Sign In
|
|
had to replace that cause the car wouldn't stay running unless you were holding the key so I replaced it and now it stays running but I have no wipers or turn signal rather confusing
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 22, 2014, 9:54 AM
Post #7 of 10
(1744 views)
|
|
Re: Grand Caravan 98
|
Sign In
|
|
Arggh - I think you are in the right spot. Rod from lock cylinder may be the issue not staying in the correct location - from where or something broken and probably need to take a look at that and how it actuates the ignition switch,
T
|
|
| |
|
|
broman
New User
Jun 22, 2014, 10:06 AM
Post #8 of 10
(1741 views)
|
|
Re: Grand Caravan 98
|
Sign In
|
|
that's the second locking cylinder I put it in because I thought that the cylinder might be the issue so I took it back and got another one and put that in and it was still doing the same thing so how do I look in the ignition see if that's the problem thank you so much for replies
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 22, 2014, 10:53 AM
Post #9 of 10
(1729 views)
|
|
Re: Grand Caravan 98
|
Sign In
|
|
I don't know why you are changing lock cylinders at all. The switch would be the only thing to suspect in that area.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 22, 2014, 2:56 PM
Post #10 of 10
(1721 views)
|
|
Re: Grand Caravan 98
|
Sign In
|
|
broman: Lock cylinder and the switch are two different things. Cylinder is where you turn the key has nothing to do with the switch down the column where the actual switching takes place that is in question. If lock cylinder is new it still must move a rod down to that switch. At best it locks the wheel and buzzes or chimes when key is left in and prevents turning the switch without correct key.
If somehow that's all worn where it goes that's the issue not just another new cylinder. I've only seen that when something like a dent puller was used to smash one out like as to steal the vehicle type thing,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
