Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Help!!


Search for (search options)
 



Mjwilson49
New User

May 31, 2020, 12:55 PM

Post #1 of 6 (1416 views)
Help!! Sign In

I have a 2004 Ford expedition xlt 5.4 and 4 wheel drive....I am replacing my wheel hubs and can not figure out how to remove the rear hubs....I have tried everything from a slide hammer to a master wheel hub remover kit....can't get it to budge and help will be appreciated...thanks in advance.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

May 31, 2020, 1:25 PM

Post #2 of 6 (1406 views)
Re: Help!! Sign In

Is the axle free enough to push in?

Are you trying to change just the bearing or the whole hub? You should be replacing the whole hub.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Ramntm
User

May 31, 2020, 2:12 PM

Post #3 of 6 (1400 views)
Re: Help!! Sign In

Did you remove the 4 bolts holding the Hub/Bearing assembly attached to the spindle? The hub should be replaced with the bearing and the wheel speed sensor as an assembly.


Mjwilson49
New User

May 31, 2020, 2:50 PM

Post #4 of 6 (1387 views)
Re: Help!! Sign In

Yes the Axle is free and out of the way and yes I am replacing the whole hub....I know what needs to be done just looking to see if anyone has any tricks that have worked or any special tools that would be helpful ( besides the usual hammer and torch and what not)


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

May 31, 2020, 2:52 PM

Post #5 of 6 (1383 views)
Re: Help!! Sign In

If it is heavily corroded where the hub slides in it can be hell getting it free.
Have you tried a heavy slide hammer or an air hammer from the back?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Mjwilson49
New User

May 31, 2020, 6:00 PM

Post #6 of 6 (1324 views)
Re: Help!! Sign In

No I haven't...I will give those a shot and see if it will do the trick....thank you






 
 
 






Search for (options) Privacy Sitemap