|
|
|
Help! 2008 Cobalt, 2.2L ecotec, 93,000 km
|
|
|
| |
|
|
karmaiko
New User
Aug 11, 2014, 9:07 AM
Post #1 of 8
(2156 views)
|
|
Help! 2008 Cobalt, 2.2L ecotec, 93,000 km
|
Sign In
|
|
Hello,
I need some help if someone could, please. Here's the situation.
I drive a 2008 Cobalt, 2.2 L ecotec engine. It has about 93,000 km on it. I have intermediate vehicle skills, but would not consider myself an expert by any means (which is why I am here!).
Last Saturday (August 2nd) my MIL came on and the coolant fan fuse had blown. I replaced the fuse and picked up a couple extra. For a few days it was good, then it came on again and the fuse had blown. It blew when the coolant temp was in the 95-100 range (normal operating temperature is 89 degrees C). I replaced it again and this time also replaced the fan relay (number 2572). The problem persisted, with the coolant running hot. This past Saturday (August 9th) I replaced the rad fan with a brand new one from dealer. It seemed to work, I drove it for an hour with no problems. No lights, no indicators, and 89^C coolant temp the entire time (or less).
Today, Monday the 11th, my coolant hit 100 degrees after I got off the highway, however now the fuse is not blowing. When I put the ignition key in first stop the MIL comes on, but it goes out when I start the vehicle.
Thoughts? Any input or feedback is appreciated!
Thank you.
edit - I have the codes on my desk at home, I will post them tonight.
(This post was edited by karmaiko on Aug 11, 2014, 10:04 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 11, 2014, 9:23 AM
Post #2 of 8
(2144 views)
|
|
Re: Help! 2008 Cobalt, 2.2L ecotec, 93,000 km
|
Sign In
|
|
So, what is your question?
What exactly are you trying to fix now. It sounds like you have your cooling problem solved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
karmaiko
New User
Aug 11, 2014, 9:51 AM
Post #3 of 8
(2140 views)
|
|
Re: Help! 2008 Cobalt, 2.2L ecotec, 93,000 km
|
Sign In
|
|
Sorry, let me elaborate a bit - when I got off the highway this morning the coolant was rising, and was at 102 C when the vehicle was stopped. I stopped the car at a gas station, let it sit for 5 minutes, then fully started the vehicle again. The MIL came on while under power.
This time, no fuse was blown though. The temperature reading promptly dropped to 95 C, but I had not heard the rad fan running while parked.
After about two hours I drove it back to the office from a job site, again on the highway. The coolant temperature was again rising and at 98 C when I stopped the vehicle. I repeated my test as before, putting the key at first stop (MIL was on) and starting it (this time MIL was off).
While safely at the office, I decided to see if I could replicate the issue. I tried putting the key in first stop a few more times. The MIL comes on at first ignition stop (electronics on, but ignition not started) but then goes out when engine starts (except as in the case noted above).
To be clear then - MIL comes on at ignition first stop, goes out when car is running (but has also stayed on), and engine coolant is running hot.
My question is what could be causing this behaviour?
(This post was edited by karmaiko on Aug 11, 2014, 10:03 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 11, 2014, 11:28 AM
Post #4 of 8
(2121 views)
|
|
Re: Help! 2008 Cobalt, 2.2L ecotec, 93,000 km
|
Sign In
|
|
I don't think you have any problem at all with temp. It is completely normal for the temp to rise in slower traffic as the fans aren't programmed to come on until higher temps.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
kev2
Veteran
Aug 11, 2014, 11:50 AM
Post #5 of 8
(2118 views)
|
|
Re: Help! 2008 Cobalt, 2.2L ecotec, 93,000 km
|
Sign In
|
|
Do you have a good scanner ? try to scan for codes- free at many places- BUT might have to look in HISTORY or PENDING.
anyway 100c is not very high... for those following thats 212F... allowing for those very inaccurate gauges I do not see a problem BUT post codes -
the vehicle is STOCK no remote starter, different thermostat, ?
(This post was edited by kev2 on Aug 11, 2014, 11:57 AM)
|
|
| |
|
|
karmaiko
New User
Aug 11, 2014, 12:26 PM
Post #6 of 8
(2111 views)
|
|
Re: Help! 2008 Cobalt, 2.2L ecotec, 93,000 km
|
Sign In
|
|
It's completely stock, with automatic transmission. Already had the juice replaced (overcautious nature from me).
I turned it on a few minutes ago and again same behaviour - turn key to first ignition stop, all system lights come on, MIL remains on. Turn it on, MIL goes out.
The fan is running.
Tonight after work I am going to take it for a drive and see if I can get it to heat up again, and see if the fan is still running.
I would just like to know why the MIL is acting up.
Do you guys know which places/companies I can take it in Canada (Toronto, ON specifically) that can give you a computer reading for free? I know some do. If I have a code reading it will help (I have the old ones from Aug 2nd on my desk at home).
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 11, 2014, 12:33 PM
Post #7 of 8
(2109 views)
|
|
Re: Help! 2008 Cobalt, 2.2L ecotec, 93,000 km
|
Sign In
|
|
Why don't you have the codes read and find out?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Aug 11, 2014, 12:42 PM
Post #8 of 8
(2106 views)
|
|
Re: Help! 2008 Cobalt, 2.2L ecotec, 93,000 km
|
Sign In
|
|
Canada: Code readings for free a maybe at chain parts outlets like Autozone boast here. Can't speak for places in Canada so ask,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
