|
|
|
How to troubleshoot Cruse Cointrol, 97 lesabre
|
|
|
| |
|
|
happydog500
Novice
Mar 27, 2008, 10:39 AM
Post #1 of 9
(3869 views)
|
|
How to troubleshoot Cruse Cointrol, 97 lesabre
|
Sign In
|
|
I have a 1997 Buick LeSabre. The cruise control stopped working. When I set it, the "Cruise" Light comes on the dash, but the cruise doesn't work.
1. What is the usual, or most likely thing that goes out on cruise?
2. How do you troubleshoot Cruise on a 1997 LeSabre? I don't know where to start.
Thank you for any help,
Chris.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 27, 2008, 11:10 AM
Post #2 of 9
(3865 views)
|
|
Re: How to troubleshoot Cruse Cointrol, 97 lesabre
|
Sign In
|
|
A maybe to check: Anything fall off or disconnected at the throttle body??
T
|
|
| |
|
|
dmac0923
Enthusiast
Mar 27, 2008, 11:48 AM
Post #3 of 9
(3864 views)
|
|
Re: How to troubleshoot Cruse Cointrol, 97 lesabre
|
Sign In
|
|
check to make sure your brake light switch is functioning properly also. since the cruise is deactivated when you apply the brakes, its just another component to rule out.
__________________________________________________
2015 Jeep Grand Cherokee
2002 Ford Ranger
2004 Toyota Corolla
1969 Ford Mustang Mach 1
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 27, 2008, 1:07 PM
Post #4 of 9
(3861 views)
|
|
Re: How to troubleshoot Cruse Cointrol, 97 lesabre
|
Sign In
|
|
Excellent dmac - that's the more likely problem with this..........
T
|
|
| |
|
|
dmac0923
Enthusiast
Mar 28, 2008, 6:15 AM
Post #6 of 9
(3848 views)
|
|
Re: How to troubleshoot Cruse Cointrol, 97 lesabre
|
Sign In
|
|
your brake lights come on and off?
not sure on your particular application. but there may or may not be 2 "limit" switches on the brake pedal travel. one is the brake light switch and there may or may not be a second limit switch on the top end of the pedal travel indicating the brake pedal is fully released.
in either case, climb under the dash and make sure the switch is adjusted propely. make sure when the pedal is fully released the "brake light switch" doesnt have any tension on the plunger. it should be just barely touching the pedal to insure prompt brake light illumination but the spring shouldnt be compressed.
then like tom mentioned check your throttle body, that the cable is still attached and not binding
__________________________________________________
2015 Jeep Grand Cherokee
2002 Ford Ranger
2004 Toyota Corolla
1969 Ford Mustang Mach 1
|
|
| |
|
| | |
|
|
Double J
Veteran
/ Moderator
Mar 29, 2008, 2:16 PM
Post #8 of 9
(3835 views)
|
|
Re: How to troubleshoot Cruse Cointrol, 97 lesabre
|
Sign In
|
|
To add...
Check that the Center High Level Stop Lamp (one in the back window) is operating too..if it isn't that can stop the cruise from functioning on this model..
If not ,have the system scanned for trouble codes and post them...
Hope that helps
|
|
| |
|
|
happydog500
Novice
Apr 4, 2008, 9:47 PM
Post #9 of 9
(3817 views)
|
|
Re: How to troubleshoot Cruse Cointrol, 97 lesabre
|
Sign In
|
|
I checked everything posted in this thread, all checked out OK. No codes stored also.
We looked at the break pedal switches and they where in the right position. I even drove down the road with up presser on the pedal.
One thing I thought of when doing that was if the pedal resting on the switch was making the car think the breaks where on, the "cruse" light wouldn't come on.
I don't know what, but the fact that the "curse" light comes on, can narrow down some things as not being the problem.
If you can think of the next things to check, let me know. Thanks for the replys,
Chris.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
