Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




ICM Repeat Failure

Search for (search options)
 



Roadturn
New User

Oct 18, 2012, 2:51 PM

Post #1 of 5 (2070 views)
ICM Repeat Failure Sign In
My 96 GMC Suburban began cutting out suddenly. I replaced the Ignition Control Module. Problem fixed. A few weeks later, the problem came back. I took the part back to (O'Reilly's) and got another ICM. Problem fixed. Two weeks later, now it's happening again. Bad parts or something else? Your advice is appreciated.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Oct 18, 2012, 2:52 PM

Post #2 of 5 (2062 views)
Re: ICM Repeat Failure Sign In
Replace the ignition coil along with the ICM this time.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Roadturn
New User

Oct 18, 2012, 3:47 PM

Post #3 of 5 (2039 views)
Re: ICM Repeat Failure Sign In
I was wondering about that, Hammer. What is the logic--erratic fire?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Oct 18, 2012, 3:49 PM

Post #4 of 5 (2036 views)
Re: ICM Repeat Failure Sign In
The ICM operates the coil and the coil is drawing too much current through the module and overloading the module.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Oct 18, 2012, 5:20 PM

Post #5 of 5 (2021 views)
Re: ICM Repeat Failure Sign In
Also important to put a thin skin coat of thermal paste on the back of the module and to be sure the heat sink surface where the module mates is clean. Module will overheat if it can't conduct heat to the heat sink.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Oct 18, 2012, 5:20 PM)





 
 
 






Search for (options) Privacy Sitemap