|
|
|
Oil pump 2.4 eclipse 2000
|
|
|
| |
|
|
kjogiantire
Novice
Nov 3, 2012, 5:52 AM
Post #1 of 12
(2357 views)
|
|
Oil pump 2.4 eclipse 2000
|
Sign In
|
|
I acquired a 2000 eclipse with a broken timing belt . Heads are redone motor back together and running ,but without oil psi .could the pump have been damaged by the broken belt ? It did damage the crank sensor ,Or can the pump be mistimed ??
(This post was edited by kjogiantire on Nov 3, 2012, 6:02 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 3, 2012, 7:03 AM
Post #2 of 12
(2301 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
Not sure why, but yes the oil pump does have a timing mark.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Nov 3, 2012, 7:05 AM)
|
|
| |
|
|
kjogiantire
Novice
Nov 3, 2012, 8:53 AM
Post #3 of 12
(2286 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
I had it lined up with the mark ,and double checked. My understanding is as long as lined up ,your in time . The lower pulley had all kinds of belt debree around it and it broke both belts when it went . I just can't see why it would have fouled up the pump .this is why I'm asking if any one else might have run across the same problem
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 3, 2012, 9:01 AM
Post #4 of 12
(2284 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
Maybe there was a lot more wrong with it than you thought when you bought it. It is also possible it could have a oil sender problem and the engine actually does have pressure. You would have to remove the sender and screw in a oil pressure gauge to find out.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
kjogiantire
Novice
Nov 3, 2012, 12:06 PM
Post #5 of 12
(2267 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
That's my next step is to check oil psi . Apriciate all the help
|
|
| |
|
|
kjogiantire
Novice
Nov 20, 2012, 7:44 AM
Post #6 of 12
(2192 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
I checked the psi through the oil sender port ,and I had zero .
The older cars would sometimes loose prime on on the pump, what's the possibility ?? Or am I just over thinking a obvious pump issue ?
Just trying to save the 200.oo plus labor
(This post was edited by kjogiantire on Nov 20, 2012, 7:48 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 20, 2012, 7:50 AM
Post #7 of 12
(2186 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
If you're getting zero pressure, something has to be completely broken, not just worn out.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
kjogiantire
Novice
Nov 20, 2012, 7:53 AM
Post #8 of 12
(2180 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
Well I Allready dropped the pan to see if there was a obstruction , but it's clean ,so I guess it's spring for the pump , I,ll let you know how it turns out. Thanks again
|
|
| |
|
|
kjogiantire
Novice
Nov 20, 2012, 9:53 PM
Post #9 of 12
(2162 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
Well I found the problem with the oil pump . You should not use a floor jack on the oil pan to support the motor ,when installing the timing belts. The sump pick up in the pan is really close to the bottom of the pan. It dosnt take much of a dent in the bottom to shut off all oil getting to the pump. Thanks guys for the help, feeling pretty dumb at this point , I did find it before I took it all apart and buy the new pump ,sooo all is well that ends well
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Nov 20, 2012, 10:01 PM
Post #10 of 12
(2159 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
If you need to do this type of work again.....use a block of wood that spans the whole length of the pan to support the engine....
|
|
| |
|
|
kjogiantire
Novice
Nov 20, 2012, 10:13 PM
Post #11 of 12
(2153 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
I new better !
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Nov 20, 2012, 10:16 PM
Post #12 of 12
(2152 views)
|
|
Re: Oil pump 2.4 eclipse 2000
|
Sign In
|
|
BTDT.....
Thx 4 taking the time to comeback & let us know the outcome
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
