|
|
|
Question about coil and gear inside
|
|
|
| |
|
|
philippepom
User
Sep 19, 2014, 4:43 AM
Post #1 of 8
(1886 views)
|
|
Question about coil and gear inside
|
Sign In
|
|
Hi
I was having a problem with my Cletrac OC3 tractor dying when hot (after 5 minutes or so) so I did changed the condensor inside the coil and the sparkplugs. I have now no start at all.. I did reconnect the spark plug wire to the right boot on the coil. I also have fire to the sparkplug. However I haven't put much attention to the gear inside the coil, to this gear :
Is it possible that the firing order is wrong now because of this, and this causing the tractor not to start ? If so, how can I "sync" this gear back ? The coil is a Wico XH1113.
Thanks.
(This post was edited by philippepom on Sep 19, 2014, 4:46 AM)
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Sep 19, 2014, 4:48 AM
Post #2 of 8
(1879 views)
|
|
Re: Question about coil and gear inside
|
Sign In
|
|
We really don't get many tractors in here, but the gear or rotor you have your arrow pointed to should be pointing close to the number 1 terminal in the distributor cap with the number 1 cylinder at top dead center on the compression stroke. That should get the tractor running if everything is ok, so you can set the base ignition timing using a timing light.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Sep 19, 2014, 4:49 AM)
|
|
| |
|
|
philippepom
User
Sep 19, 2014, 5:47 AM
Post #3 of 8
(1868 views)
|
|
Re: Question about coil and gear inside
|
Sign In
|
|
Thanks for your reply.
If I understand right, I must place the piston #1 at his TDC and then place the rotor inside the coil poiting exactly to the #1 boot ?
I did found this to help me find the TDC of piston #1.
link deleted ......... not allowed
But how to know which piston is #1 ? It's a Cletrac OC-3 tractor. Do I need the engine model or it'll always be on the same position ?
(This post was edited by Hammer Time on Sep 19, 2014, 6:17 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 19, 2014, 6:20 AM
Post #4 of 8
(1863 views)
|
|
Re: Question about coil and gear inside
|
Sign In
|
|
Yes, it does have to be at TDC but specifically on TDC of the compression stroke. You need to hold your finger over the #1 spark plug hole and turn the engine by hand. As it comes up on TDC compression, you will feel pressure building on your finger. You can stick a coathanger or something like that in the cylinder to see when it's exactly at the top.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
philippepom
User
Sep 19, 2014, 7:08 AM
Post #5 of 8
(1857 views)
|
|
Re: Question about coil and gear inside
|
Sign In
|
|
Thank you. If I understand right, the #1 piston is the one closest to the front of the engine ? The one closest to the belts ?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 19, 2014, 7:24 AM
Post #6 of 8
(1855 views)
|
|
Re: Question about coil and gear inside
|
Sign In
|
|
It should be but as DS told you, we have no info specific to that engine.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
philippepom
User
Sep 19, 2014, 7:34 AM
Post #7 of 8
(1853 views)
|
|
Re: Question about coil and gear inside
|
Sign In
|
|
I'll look into all that and report back if I can get it to work. Thanks.
|
|
| |
|
|
philippepom
User
Oct 8, 2014, 3:05 AM
Post #8 of 8
(1793 views)
|
|
Re: Question about coil and gear inside
|
Sign In
|
|
Just to let you know that I was able to start the bulldozer up with the procedure. Thanks a lot.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
