|
|
|
Slop in Shifter 95 Grand Marquis
|
|
|
| |
|
|
bigjohn
User
Sep 26, 2012, 8:42 PM
Post #1 of 7
(4610 views)
|
Slop in Shifter 95 Grand Marquis
|
|
|
1995 Mercury Grand Marquis 150,000
The shifter on the steering column has become very sloppy, someone told me the shifter assembly is probably cracked and in need of replacement with a good used or new one. What do you think and is this a DIY project?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 27, 2012, 3:10 AM
Post #2 of 7
(4569 views)
|
|
Re: Slop in Shifter 95 Grand Marquis
|
|
|
shifter assembly? Have you found a part by that name?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Sep 27, 2012, 5:00 AM
Post #3 of 7
(4559 views)
|
|
Re: Slop in Shifter 95 Grand Marquis
|
|
|
Your probably meaning the shift tube. Either the shift tube bushings are worn out, the bolts on the end of the tube that hold the shifter bracket are loose, of the tube itself is broken. Drop the column down and take a look, you'll see the problem.
Shift tube bushings
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Sep 27, 2012, 5:01 AM)
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Sep 27, 2012, 9:14 PM
Post #5 of 7
(4535 views)
|
|
Re: Slop in Shifter 95 Grand Marquis
|
|
|
Actually Tom, the column Ford used in that year had a pot metal tube that was very prone to snapping and is pretty simple DIY job. Replaced more than a few myself of that vintage.
|
|
| |
|
|
cwp777
New User
Aug 1, 2013, 5:46 PM
Post #6 of 7
(4096 views)
|
|
Re: Slop in Shifter 95 Grand Marquis
|
|
|
I just fixed mine. It wasn't the tube at all. It was the bracket in the dash above the brake pedal which has two torx screws which had worked loose. It had got worse a little at a time. I removed the plastic and metal shield under the dash, above the brake pedal. Look up and wiggle the shifter, you will see if this is the problem. The bracket will be moving ( because it is loose) when you wiggle the shifter. Tighten the two screws and it's fixed. Hope that helps.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 1, 2013, 5:57 PM
Post #7 of 7
(4094 views)
|
|
Re: Slop in Shifter 95 Grand Marquis
|
|
|
Please read the FORUM RULES before posting. This thread is nearly a year old.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
