Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Splash shield trouble


Search for (search options)
 



Milka
New User

Jun 11, 2017, 5:30 PM

Post #1 of 3 (1346 views)
Splash shield trouble Sign In

So one of the splash shield clip came out and the hole is too big to just use a new clip.
I'm gonna just replace them with some nuts/bolts and washers. More sturdy.
I've replace the 1 clip with ziptie for now.

Now the splash shield itself is bent out of the original shape.
But there is still a huge gaping hole around it because the ziptie (and nut/bolt/washer in the future) is only holding the shield up in one spot.
And it makes a wicked sound when car is going anything beyond 40mph.
I tried taping it with some duct tape but tape keeps falling off.
I would like to try other ways of fixing it myself before having to replace it at the dealer (dirt poor student here).

Anyone has some brilliant ideas how to fix this besides taping it or replace the shield?


2013 Camry here.
Any response/suggestion appreciated.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jun 11, 2017, 5:45 PM

Post #2 of 3 (1344 views)
Re: Splash shield trouble Sign In

Well, there's the obvious one..................... buy a new splash shield and don't drive over the curbing stops any more..



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Sidom
Veteran / Moderator
Sidom profile image

Jun 12, 2017, 1:06 PM

Post #3 of 3 (1313 views)
Re: Splash shield trouble Sign In

 
Push pins come in different sizes.........just get a bigger one and make the other hole bigger......


If the hole has got too big for a bigger push pin,,,,,the as HT says.....it would be best to get a new shield









 
 
 






Search for (options) Privacy Sitemap