|
|
|
Starter does not always disengage
|
|
|
| |
|
|
wwwqueen
User
Nov 22, 2006, 9:25 AM
Post #1 of 6
(3989 views)
|
|
Starter does not always disengage
|
Sign In
|
|
 If anyone can help me, please do. I just had new starter and flywheel put on my 1991 Taurus because the starter was not disengaging and the flywheel was damaged. The problem, however, has not disappeared. Does anyone have an idea what else might be the cause? I don't want to have to replace the flywheel again because of this intermittent problem - the beast is running very well otherwise. If you have advice, please share it with me.
|
|
| |
|
|
REYGS
User
Nov 22, 2006, 2:03 PM
Post #2 of 6
(3986 views)
|
|
Re: Starter does not always disengage
|
Sign In
|
|
Is your key going back to the run position after you start the car?. Ford had a lot of problems with their ignition switches coming apart in those years. binding inside.You can see by following the rod from your ignition cylinder to the ignition switch on the steering column. good luck.
|
|
| |
|
|
wwwqueen
User
Nov 22, 2006, 2:29 PM
Post #3 of 6
(3985 views)
|
|
Re: Starter does not always disengage
|
Sign In
|
|
I will certainly look at that, in fact, I was wondering if the ignition switch was faulty anyway - however - the last time this happened, I was using my remote starter - the key was not in the ignition - would the ignition switch be an issue even if the key was not turned in it? This has happened sometimes before with the remote starter as well as with the key in the ignition switch.
|
|
| |
|
|
REYGS
User
Nov 22, 2006, 3:49 PM
Post #4 of 6
(3982 views)
|
|
Re: Starter does not always disengage
|
Sign In
|
|
Well that takes the ignition sw out of the picture. With a new starter in my gues is electrical short or sticky relay. lots of fun. like i said good luck.
|
|
| |
|
|
Guest
Anonymous Poster
May 17, 2009, 5:26 PM
Post #5 of 6
(3726 views)
|
|
Re: Starter does not always disengage
|
Sign In
|
|
If the remote starter is not a factory installed one (ie: after-market) remove it and see if you still have the problem. relays seldom fail, and when they do nothing usually happens because usually no electrical connection is made.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 17, 2009, 5:41 PM
Post #6 of 6
(3728 views)
|
|
Re: Starter does not always disengage
|
Sign In
|
|
Hey guest,
This was a 3 year old question.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
