|
|
dennishazard
User
Mar 24, 2014, 3:54 AM
Post #1 of 10
(2111 views)
|
98 dodge Durango 160,000 miles 5.9 l.
need help once again, I have replace the water pump twice, had garage do it, now its leaking again,this will be the third time I've had it replaced, is there some thing else that could be wrong ? the garage I work with is good they do good work, this last one lasted 4 months, thanks Dennis
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Mar 24, 2014, 4:31 AM
Post #2 of 10
(2098 views)
|
What's the condition of the rest of the cooling system?
Have you tested for electrolysis yet?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dennishazard
User
Mar 24, 2014, 6:13 AM
Post #3 of 10
(2090 views)
|
no I have not, what is that ? I had the system flushed about 3 months ago, seems like every time I have a new pump installed it last about 4 months, I have no idea what electrolysis is but I don't believe it was ever done, the mechanic said my lower hose appears to be leaking too,so im taking it in this morning and he's going to check every thing out,thanks
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Mar 24, 2014, 6:18 AM
Post #4 of 10
(2088 views)
|
Electrolysis is when the electrical system in the car has a faulty ground path for at least one circuit and the current finds it's way to ground through the cooling system, to the block, to the battery.
Take a digital voltmeter and with the engine running and the usual accessories on, attach the negative lead to battery negative and dip the positive lead into the coolant in the radiator and you should not see more than a tenth or two reading.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
kev2
Veteran
Mar 24, 2014, 6:53 AM
Post #5 of 10
(2085 views)
|
My 2 cents- parts quality is a major issue these days, enough said on that.
Is there a bearing problem OR just the seal?
Are we sure its the WP - not bypass tube or the timing cover - a crack there would have us kneejerk to WP.
Maybe there is something affecting the pump- excess belt tension? fAN assembly? A near by pulley excess runout?
|
|
| |
|
|
dennishazard
User
Mar 24, 2014, 7:18 AM
Post #6 of 10
(2080 views)
|
ok what would that tell me if the reading was bad ?
|
|
| |
|
|
dennishazard
User
Mar 24, 2014, 7:23 AM
Post #7 of 10
(2079 views)
|
bypass tube looks good, ill have the mechanic check them all out im going back ther now, thanks guys !!!!!!!!
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 24, 2014, 7:34 AM
Post #8 of 10
(2077 views)
|
Bad reading could cause fast corrosion and failure. IMO bypass hose should be new and out of the question. Pump is fairly common type for the layout of engine and usual failures of pumps are first bearings then leaks out a vent hole noticed. Pulley would be wobbly if so first.
There's a tensioner involved that just may be way too tight causing failures early as bearing on belt driven item do NOT fare well if too tight. Just a thought of the above all credible or something is going without notice and surprised it holds right away with a new one if so?
T
(This post was edited by Tom Greenleaf on Mar 24, 2014, 7:37 AM)
|
|
| |
|
|
dennishazard
User
Mar 24, 2014, 7:53 AM
Post #9 of 10
(2069 views)
|
I did have a problem last weekend I herd a noise in the engine comp, thought it was the alt, so I put a new one in and it turns out it was the idler pulley, so I had to put that in and a new belt, but had the problem with the water pump way before that, I hope the mechanic can figure it out I told him what you guys suggested so he'll look around ,,Thanks
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Mar 24, 2014, 9:09 AM
Post #10 of 10
(2065 views)
|
With all those pulley items it's worth checking out at least, T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
