Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









loes hose...


Search for (search options)
 



mychevys10
User

Mar 10, 2009, 6:21 AM

Post #1 of 6 (1487 views)
loes hose... Sign In

1995 Chevy Blazer
4.3L vortec Vin: W
4WD auto trans
75k miles

Was working on changing the oil and suspension parts of my truck. I ended up taking off the 2 bottom skid plates... or whatever you call them.I noticed that a hose fell down. One side seems to be connected to the top of the front diff, but I cant find where the other end goes. It looks like a vacuum hose I believe. the lose end had a plastic fitting on it but it was melted so bad I couldn't tell what it looks like. Idk if it has anything to do with it not being able to get into 4wd hi. once again I'm really confused about this truck. Just seem that once I fix one thing 3 more problems show up. Thanks for the replies.Crazy

Mike


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Mar 10, 2009, 6:44 AM

Post #2 of 6 (1484 views)
Re: loes hose... Sign In

A hose to a gear case such as this is a vent for it. The end is supposed to act as a snorkle much like one used for swimming!




(Mr. C. is that you?)

Same idea - don't let water back in. Ok: Put hose back on diff/gearcase and the other end should just clip up higher than the gearcase such that it would be higher than any expected water - got it?

If the end is really destroyed you best put something there to keep crap out but it needs to vent or gearcase could blow seals!

T



(This post was edited by Tom Greenleaf on Mar 10, 2009, 6:48 AM)


mychevys10
User

Mar 10, 2009, 8:39 PM

Post #3 of 6 (1478 views)
post icon Re: loes hose... Sign In

Cool beans. Thanks for the reply! I'll get it up and out of the way of any moving or hot parts too. LolWink


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Mar 11, 2009, 5:55 PM

Post #4 of 6 (1472 views)
Re: loes hose... Sign In

Hey!!! I'm fat, but not THAT fat!SmileSmileSmile
Not sure on this application, but some of those transfercases' were vacuum operated. The 3/8" diameter hose would be the vent hose. If a vacuum operated system, the hose would be closer to 3/16".
Loren
SW Washington


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Mar 11, 2009, 6:28 PM

Post #5 of 6 (1468 views)
Re: loes hose... Sign In

Ha - Didn't think you'd catch that!



Two stars for Loren for the sharp eye!

Tom and fearless guard Kitty!




Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Mar 12, 2009, 4:16 PM

Post #6 of 6 (1461 views)
Re: loes hose... Sign In

Hey, I might be old, but my mind is like a steel trap.






Rusted shut.Unsure
Loren
SW Washington






 
 
 






Search for (options) Privacy Sitemap