|
|
|
please help, 1998 Plymouth breeze
|
|
|
| |
|
|
stevo6672
Novice
Nov 14, 2011, 3:04 PM
Post #1 of 15
(3939 views)
|
|
please help, 1998 Plymouth breeze
|
Sign In
|
|
I'm having a serious problem. I've got a 1998 Plymouth breeze that needed a crankshaft position sensor replaced. Car would run fine than after a little bit of driving the car would stall out. A ran a diagnostic on it and it came up as cam/crankshaft sensors. So I went out and bought both sensors. I've replaced them both and now the car wont start. It cranks but nothing happens. I've checked all the electrical connections and they seem to be fine. Can anyone help me figure this out. What maybe I did wrong? Or what could be wrong.
THANKS! 
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Nov 14, 2011, 3:37 PM
Post #2 of 15
(3911 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
Try putting the old ones back on & see if it starts, if it does, you got a defective new one....
|
|
| |
|
|
stevo6672
Novice
Nov 14, 2011, 4:25 PM
Post #3 of 15
(3901 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
I tried the old camshaft sensor did same thing. But the crankshaft sensor had yo be drilled out.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 14, 2011, 4:27 PM
Post #4 of 15
(3898 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
That's a problem. The exact position is critical.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
stevo6672
Novice
Nov 14, 2011, 4:34 PM
Post #5 of 15
(3894 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
I just put in another new one same thing. The car isn't even getting a spark.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 14, 2011, 4:48 PM
Post #6 of 15
(3887 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
How about an engine size?
What exactly did you drill?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Nov 14, 2011, 4:49 PM)
|
|
| |
|
|
stevo6672
Novice
Nov 14, 2011, 5:00 PM
Post #7 of 15
(3880 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
Its 2.4L DOHC. I had to drill a hole into the actual sensor to be able to pull it out. It was so swollen there was no other way.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 14, 2011, 5:05 PM
Post #8 of 15
(3876 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
OK, I see what type you have now. i was concerned that you drilled the mounting bolts and changed the position of the sensor. You're going to need some test equipment to go any further unless you can physically see a problem. Double check that you didn't bend the connector blades over with the plug.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
happytech
New User
Nov 14, 2011, 5:07 PM
Post #9 of 15
(3873 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
What was the codes that told you the crank and camshaft senors was bad? im taking it that u have a v6 is that correct? if u drilled it out did u look to make sure u got it all out? the position is very sensitive if it to deep or not in all the way it want pick up.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 14, 2011, 5:18 PM
Post #10 of 15
(3867 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
There are no V6s in the Plymouth Breeze. He already stated that it was a 2.4.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
stevo6672
Novice
Nov 14, 2011, 6:43 PM
Post #11 of 15
(3863 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
Yeahp I made sure that everything was out and also cleaned up the hole. The sensor is Sitting in there properly. I ran threw and triple checked all of the connections.
I don't recall what codes where, as I was at autozone and they ran the scan. Three codes popped up. The third stated timing components. It ran fine before I replaced the sensors. Can a faulty sensor cause the engine to not want to create a spark?
I'm not a mechanic so I have no idea lol.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 14, 2011, 6:46 PM
Post #12 of 15
(3861 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
It sure will. It will also take out injector pulse.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
stevo6672
Novice
Nov 14, 2011, 6:50 PM
Post #13 of 15
(3857 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
Maybe I just got a faulty part. Ill run a test on it again tomorrow. Ill keep y'all updated. Thanks for the helps guys!
|
|
| |
|
|
stevo6672
Novice
Nov 16, 2011, 1:09 AM
Post #14 of 15
(3836 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
UPDATE.
I ran another test and no error codes came up. Looks like its off to the shop.
|
|
| |
|
|
stevo6672
Novice
Nov 17, 2011, 3:42 PM
Post #15 of 15
(3814 views)
|
|
Re: please help, 1998 Plymouth breeze
|
Sign In
|
|
So I finally got it started, but is running rough. Any idea's?
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
