Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









stalls


Search for (search options)
 



tes
User

Feb 11, 2013, 9:03 PM

Post #1 of 5 (2028 views)
stalls Sign In

a 98 crv the car starts and dies right there, but when i wiggle the wires underneath the steering wheel it runs for a while and dies again, and there is no check engine light, could this be the ignition switch,


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Feb 12, 2013, 4:25 AM

Post #2 of 5 (1968 views)
Re: stalls Sign In

That's something that you're going to have to determine. You found the area that triggers it. Now try to narrow it down further.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



tes
User

Feb 12, 2013, 10:35 AM

Post #3 of 5 (1946 views)
Re: stalls Sign In

thank you and may the lord bless you,.


nickwarner
Veteran / Moderator
nickwarner profile image

Feb 12, 2013, 7:16 PM

Post #4 of 5 (1926 views)
Re: stalls Sign In

Wiggle one wire at a time and see if you can find the one causing the issue. Then pull the plug off the switch and look to see in the connector is burnt or the pin is loose in the housing.


Sidom
Veteran / Moderator
Sidom profile image

Feb 12, 2013, 8:04 PM

Post #5 of 5 (1919 views)
Re: stalls Sign In

A bad ign switch was common on those.....See if holding the key just a hair forward of the run position will keep it running....Don't turn so far that the starter engages, but if it is a bad switch, you will be able to hold it in the "sweet spot" & keep it running...






 
 
 






Search for (options) Privacy Sitemap