Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




starter problems

Search for (search options)
 



ltstevo
New User

Sep 3, 2009, 11:56 AM

Post #1 of 4 (1592 views)
starter problems Sign In
Hey All,

03 Chrysler Van 3.3 liter. Auto transmission

Replace starter and battery but engine wont turn over. Bendix sound like it is engaging but wont turn over motor.
Motor will rotate by hand via harmonic balencer but not with starter.

Secret relay that is bad? Fried wire somewhere?

This is driving me crazy....arggggg. Any help would be appreciated.

Lt Stevo


Sidom
Veteran / Moderator
Sidom profile image

Sep 3, 2009, 12:04 PM

Post #2 of 4 (1586 views)
Re: starter problems Sign In
If you are hearing the starter "click" when you turn the key, it sounds like you either have a bad battery or connection problem. 1st thing is to have the battery tested & make sure it's good. Then clean the terminal really good. Might no be a bad idea to even trace the neg cable down the block, unbolt it & clean that area as well


ltstevo
New User

Sep 3, 2009, 12:27 PM

Post #3 of 4 (1584 views)
Re: starter problems Sign In
I am pretty sure the battery is good as I swapped it from another vehicle which starts without problem.

I didn't think about tracing the ground cable though. I check the volts going into the starter and it
showed 18 v on the meter.

guess I give the ground cable a try.

Thanks

LTSTEVO


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Sep 4, 2009, 9:20 AM

Post #4 of 4 (1576 views)
Re: starter problems Sign In
Lt.; You may want to recheck that voltage reading. You are dealing with a 12V system, here.
You should have 12V (or equal to battery voltage) at the large terminal on the starter. When the key is turned to the 'start' position, you should have equal voltage to the small terminal on the starter. If you don't, then you'll need to start working backwards from there..Relay, ignition switch, ect.
Loren
SW Washington

(This post was edited by Loren Champlain Sr on Sep 4, 2009, 9:24 AM)





 
 
 






Search for (options) Privacy Sitemap