Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









steering column


Search for (search options)
 



yayo
Anonymous Poster
johnsonj141356@gvltec.mailcruiser.com

Jun 23, 2008, 8:02 AM

Post #1 of 5 (3165 views)
steering column Sign In

I am trying to replace the steering column switch in my 1982 Oldsmobile Cutlass Supreme. I have removed the Steering wheel and the ignition switch but i still can't get to it PLEASE help!


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jun 23, 2008, 11:27 AM

Post #2 of 5 (3161 views)
Re: steering column Sign In

There's a tool that holds the locking wheel down such that you can remove a wire snap ring then it will allow you further down to a small bolt or something that holds the body of the lock cylinder itself.

That ring is tricky but will come out with two flat head screwdrivers - snap ring pliers aren't so helpful as it is withOUT eylelets,





Shown in that snap ring the the tool threads onto spindle bolt and little nut pushes it down. Common tool - cheap or rentable,

T



yayo
Anonymous Poster
johnsonj141356@gvltec.mailcruiser.com

Jun 24, 2008, 10:07 AM

Post #3 of 5 (3153 views)
Re: steering column Sign In

Thank you but i already have the lock ring off this is the actual piece i have to replace
it goes inside the column behind the ignition switch housing i belive it locks the shifter in place but i can't get to it I need to know how to remove the blue ignition housing the piece right behind the steering wheel that holds the ignition switch.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jun 24, 2008, 12:57 PM

Post #4 of 5 (3149 views)
Re: steering column Sign In

Shoot - your pic didn't showUnsure Not sure just where you are at but things should tilt with wires still attached to get further down. You probably are needing to remove the directionals and a wire loom that should unplug down by the pedals to take the housing that hold the lock cylinder itself off.

Just Googled the web dry looking for a blowup of where your at and only found one with a floor shift so no shifter in that particular diagram.

Try your pic again or another way if you can,

T



Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jun 24, 2008, 12:59 PM

Post #5 of 5 (3148 views)
Re: steering column Sign In


That's all I could find out there - it doesn't have the shifter in this.......

T







 
 
 






Search for (options) Privacy Sitemap