|
|
gahumble
User
Apr 26, 2012, 1:09 PM
Post #1 of 6
(2302 views)
|
tachometer inop
|
|
|
1995 nissan p/u 4x4 2.4L. tach was stuck @ 3000 now it's pegged. any ideas? i have a haynes and chilton book, no info.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Apr 26, 2012, 3:24 PM
Post #2 of 6
(2272 views)
|
|
Re: tachometer inop
|
|
|
Does it come back down when you shut the engine off?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
gahumble
User
Apr 28, 2012, 10:09 AM
Post #3 of 6
(2235 views)
|
|
Re: tachometer inop
|
|
|
yes, it drops back to 0. yesterday i started it, tach went to 1200 and stuck. back to 0 when key off
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Apr 28, 2012, 10:49 AM
Post #4 of 6
(2227 views)
|
|
Re: tachometer inop
|
|
|
Probably wouldn't be a bad idea to start by checking power and grounds circuits to the tachometer.
You can do this using a volt meter and backprobing the insturment panel connectors. I can give you step by step instruction on how to do this, but you have to have a volt meter and understand how to use it.
The only problem you'll have is if the power and grounds are good and you need to verify the signal from the ECU to the tach. You'll need something fast to watch the signal such as a graphing multimeter or oscilloscope. You also may need a enhanced scan tool for Nissan to look at the ECU data stream information to be sure the ECU is reading the correct RPM signal.
One last thing is to be sure you don't have some sort of interference problem such as secondary ignition leaks causing the signal to the tach to be corrupted. I know all this sounds pretty complicated, but your working with electrical circuits and signals and they are complicated in themselves.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
gahumble
User
Feb 6, 2013, 11:33 AM
Post #5 of 6
(2029 views)
|
|
Re: tachometer inop
|
|
|
sorry. customer didn't care if it works
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Feb 6, 2013, 4:50 PM
Post #6 of 6
(2007 views)
|
|
Re: tachometer inop
|
|
|
Thanks for the follow up. Since customer denied repair or diagnosis, topic is closed.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
