|
| | |
|
|
higgins
New User
Aug 12, 2017, 4:20 AM
Post #1 of 7
(1866 views)
|
|
Charging not going well
|
Sign In
|
|
I've been working on GrandPa's 1992 Buick PA R12 AC system for over 2 months now - I have studied the charging procedure over and over - every single piece of AC hardware is new - system held great vacuum . Did all my pre-checks....Today was the big day to finally charge and then ...flop..
With the car off, I charged one 12oz. R12 can as a liquid on the High side (HR6 Compressor) - no problem there. Turned off the high side valve and then connected 2nd can to the Low. Turned the car on - Compressor started cycling. Low and High side pressures going up and down pretty quickly as the compressor cycles. As soon as I open the Low side valve for the 2nd R12 can to flow in , its stops cycling and then both pressures climb/equalize at 110psi - its about a 100deg. here in Dallas. ..Even though I put the 2nd can in hot water - upright- seems like no more gas is flowing , compressor is doing nothing and gauges are equalized at 110...I tried to jump the Low Pressure Cutoff switch just to see if the clutch would engage - but nothing happened.
I let the car cool down and then started it up again wit the AC on. The compressor started cycling and since my R12 can was still connected I opened the valve to try to charge more. As soon as I open the Low side valve the compressor stopped cycling and the Low Pressure went to 110psi - same for High side.
Any help would be highly appreciated.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 12, 2017, 4:36 AM
Post #2 of 7
(1862 views)
|
|
Re: Charging not going well
|
Sign In
|
|
You're not clear on one thing. Is the compressor disengaging when this happens?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 12, 2017, 5:22 AM
Post #3 of 7
(1851 views)
|
|
Re: Charging not going well
|
Sign In
|
|
If it cycles too many times in a certain period of time the ecm will disable the compressor and set code 66. You should be changing this by using a refrigerant scale instead.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
higgins
New User
Aug 12, 2017, 9:22 AM
Post #5 of 7
(1824 views)
|
|
Re: Charging not going well
|
Sign In
|
|
I found that my Low side coupler wasn't making good contact with the Schrader valve...all is good and sorry for the trouble.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Aug 12, 2017, 11:02 AM
Post #7 of 7
(1814 views)
|
|
Re: Charging not going well
|
Sign In
|
|
?In Reply To
my Low side coupler wasn't making good contact with the Schrader valve
Hope you are either using REAL R-12 not "Freeze 12" with that problem. That's a common problem with retrofit adaptors you can adjust or have to not generally OE R-12 Shraders.
Note that Freeze-12 isn't one molecule of real R-12 at all, worse it's a whole different procedure to work with,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Strut spring orientation and strut mount tension nut
