|
|
|
1999 Dodge Ram 1599 5.9L 2wd
|
|
|
| |
|
|
maxtg09
New User
Jul 6, 2010, 2:38 PM
Post #1 of 8
(2230 views)
|
|
1999 Dodge Ram 1599 5.9L 2wd
|
Sign In
|
|
Just installed a rebuilt transmission and new torque converter, but the transmission is not pumping the fluid, did I need to fill the T/C before installing it into the tranny. It had a little fluid in it so I did not add any, but the transmission is not pumping the fluid through the system.
(This post was edited by maxtg09 on Jul 6, 2010, 2:38 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 6, 2010, 2:58 PM
Post #2 of 8
(2226 views)
|
|
Re: 1999 Dodge Ram 1599 5.9L 2wd
|
Sign In
|
|
Have you filled it yet?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jul 6, 2010, 7:40 PM
Post #3 of 8
(2222 views)
|
|
Re: 1999 Dodge Ram 1599 5.9L 2wd
|
Sign In
|
|
Depending on the tranny you have, w/ the converter, it will hold between 11 & 16 qts of ATF.
So you need to get close before it's going to start working...........
|
|
| |
|
|
maxtg09
New User
Jul 7, 2010, 8:29 AM
Post #4 of 8
(2215 views)
|
|
Re: 1999 Dodge Ram 1599 5.9L 2wd
|
Sign In
|
|
I did not fill the converter before installing it in the Transmission, But I filled the transmission after installing. However it will not pump the fluid.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 7, 2010, 8:49 AM
Post #5 of 8
(2211 views)
|
|
Re: 1999 Dodge Ram 1599 5.9L 2wd
|
Sign In
|
|
You have to continue to fill the transmission after starting the engine. It only holds a couple of quarts in te pan and that will get pumped out almost immediately so you have to keep checking and adding until it reads full.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
maxtg09
New User
Jul 7, 2010, 10:01 AM
Post #6 of 8
(2207 views)
|
|
Re: 1999 Dodge Ram 1599 5.9L 2wd
|
Sign In
|
|
The dipstick shows that it is full, while running, but after turning off the engine, I pulled the rear transmission line and there was no fluid in the line. so I stsrted the engine and nothing was pumping through the line. I am stasrting to think that I should have filled the torque converter before installing it in the transmission. What do you think?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 7, 2010, 10:26 AM
Post #7 of 8
(2204 views)
|
|
Re: 1999 Dodge Ram 1599 5.9L 2wd
|
Sign In
|
|
No, that's not the problem. You may have broken something or assembled it incorrectly. The converter will fill on it's own.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
hondamansi
Novice
Aug 11, 2010, 8:08 PM
Post #8 of 8
(2181 views)
|
|
Re: 1999 Dodge Ram 1599 5.9L 2wd
|
Sign In
|
|
Did the torque converter get set right? Should slide/click in twice while rotating it into place.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
