|
|
|
46re transmission output shaft
|
|
|
| |
|
|
Jab2015
Novice
Aug 18, 2015, 9:49 PM
Post #1 of 10
(3342 views)
|
|
46re transmission output shaft
|
Sign In
|
|
I just had a 46re rebuilt out of my 98 cherokee, and before I installed it. I want to know if this is a problem. cause i do not remember when i took it out.
The inner output shaft is very hard to turn, is this normal? maybe cause it is all brand new so its very tight? I can bearly turn it by hand. More like i need a vice grip to turn it. I hear no grinding or anything like that. anything will help. thanks.
|
|
| |
|
|
gsferraro
Veteran
Aug 19, 2015, 2:34 AM
Post #2 of 10
(3328 views)
|
|
Re: 46re transmission output shaft
|
Sign In
|
|
Hello,
When you say the inner output shaft, do you mean the one that splines into the overdrive section, and not the one that sticks out the back. Gary
|
|
| |
|
|
Jab2015
Novice
Aug 19, 2015, 9:55 AM
Post #3 of 10
(3311 views)
|
|
Re: 46re transmission output shaft
|
Sign In
|
|
I'm sorry I said it wrong. lol. i meant the input shaft for the torque converter. the transmission is all together. and i seem to have no end play. I have tried to pull the shaft out or push in. nothing, I'm thinking they make have not shimmed it correctly.
|
|
| |
|
|
gsferraro
Veteran
Aug 19, 2015, 10:30 AM
Post #4 of 10
(3301 views)
|
|
Re: 46re transmission output shaft
|
Sign In
|
|
Something is wrong, lossen up the pump bolts,and see if the pump pops up, if it does it may be out a clutch from one of the drums. Were you playing with shims or just put it back the way it came apart. Gary
|
|
| |
|
|
Jab2015
Novice
Aug 19, 2015, 11:05 AM
Post #5 of 10
(3295 views)
|
|
Re: 46re transmission output shaft
|
Sign In
|
|
I didn't adjust the shims. I'm thinking what you just said. there is a clutch out that is not seated. when i take the pump off, everything spins free. soon as i put the pump in, it takes a vise grip to turn it.
|
|
| |
|
|
gsferraro
Veteran
Aug 19, 2015, 12:44 PM
Post #6 of 10
(3285 views)
|
|
Re: 46re transmission output shaft
|
Sign In
|
|
Hello,
Probably some kind of assembly error, tale the pump out make sure foward and direct clutches are seated, did you change any hard parts? Gary
|
|
| |
|
|
Jab2015
Novice
Aug 19, 2015, 2:23 PM
Post #7 of 10
(3274 views)
|
|
Re: 46re transmission output shaft
|
Sign In
|
|
No hard parts. just a TCI soft rebuild kit, and solenoids.
|
|
| |
|
|
gsferraro
Veteran
Aug 19, 2015, 3:43 PM
Post #8 of 10
(3269 views)
|
|
Re: 46re transmission output shaft
|
Sign In
|
|
Ok, pull the front of the trans apart make sure the clutches are all in place. The pump should sit flat, meaning when your tightening down the bolts the pump should not be drawn down further than where its sitting. Gary
|
|
| |
|
|
Jab2015
Novice
Aug 20, 2015, 8:25 AM
Post #9 of 10
(3242 views)
|
|
Re: 46re transmission output shaft
|
Sign In
|
|
I got it. I'm honestly not sure what was misaligned. But I pulled the pump and valve body. Took off the front band, reset all the clutches. I reinstalled the pump. could only get it so far with my hands torqued the bolts and drew the oil pump all the way down. It spins now by hand with really grabbing it, but I now have good end play of about .035. so I am going to run with. Thank you Gary for your help.
|
|
| |
|
|
gsferraro
Veteran
Aug 20, 2015, 8:52 AM
Post #10 of 10
(3241 views)
|
|
Re: 46re transmission output shaft
|
Sign In
|
|
Good deal, glad it worked out. Gary
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
