|
| | |
|
|
Blakes7
New User
Oct 28, 2011, 6:52 AM
Post #1 of 4
(2111 views)
|
Hi! I have a 1996 toyota corolla, with a 5-speed transmission. It has 175,000 miles. A couple
of days ago, I was stopped at a light and the car started shaking,
lurched, the gear shift jumped to the neutral position, locked so I couldn't move it at all, then the car
stalled out. I couldn't move the gear shift until I shut off. Then I
could put it into 1st, start the car, and it ran normally.This has
happened several times, actually more than several, almost every time I
stop at a light. Though sometimes, it doesn't shake but if i let up on
the brake, the car moves forward. It's obviously in gear. A few times,
I'd slow to a light and go to down shift from 3rd to 2nd and the gear
shift locked up. It would be in neutral position, but I couldn't budge
it to shift into any gear.Now I've been told this car has a wet clutch,
but I'm not sure what that is. Is it something that could be leaking
causing this, or is the pressure plate, i.e. the clutch, bad and I need a
clutch kit? Somebody told me that it could be a vacuum leak, but I
can't figure any way that could have anything to do with it. Could it be anything else? Any and all responses will be greatly appreciated. Thanks.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 28, 2011, 9:48 AM
Post #2 of 4
(2091 views)
|
|
Re: Pressure Plate?
|
Sign In
|
|
If you're losing your clutch pedal pressure and resistance, then you likely have a problem in the hydraulic system of either the slave cylinder or the clutch master. See if it is low on fluid and if so, find the leak.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Blakes7
New User
Oct 28, 2011, 10:45 AM
Post #3 of 4
(2084 views)
|
|
Re: Pressure Plate?
|
Sign In
|
|
Thanks for the reply. Both the master and slave were replaced 2 months ago. Thanks.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 28, 2011, 11:16 AM
Post #4 of 4
(2081 views)
|
|
Re: Pressure Plate?
|
Sign In
|
|
That doesn't mean anything. It needs to be checked out.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
