|
|
|
Transmission Support Question
|
|
|
| |
|
|
technoplume
Novice
Mar 13, 2017, 5:08 PM
Post #1 of 2
(1468 views)
|
|
Transmission Support Question
|
Sign In
|
|
Hi,
2010, Chrysler 300, Touring RWD 3.5L, 118Km
I change the transmission support tonight and I had some trouble putting 1 screw back.
So I took the cross member screws off, and the support was holding it by the 2 screws.
The cross member came free and rotated about 10 to 15 degree,
this is probably due to the tension when I torque the screw.
Question is, is this normal, is there a trick for the support to not do that ?
The torque I found is 48 Nm for the cross member to the frame, and 68Nm for the cross member to the support.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Mar 13, 2017, 6:02 PM
Post #2 of 2
(1463 views)
|
|
Re: Transmission Support Question
|
Sign In
|
|
You probably either have the wrong mount or mounted it backwards.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 