|
|
mazda gtx
Novice
Sep 19, 2009, 1:20 AM
Post #1 of 8
(1509 views)
|
|
manual transmission
|
Sign In
|
|
just replaced clutch in mazda gtx engages into gear slightly moves then slips as did old clutch
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 19, 2009, 4:32 AM
Post #2 of 8
(1500 views)
|
|
Re: manual transmission
|
Sign In
|
|
Please explain a little more clearly.
Is the clutch slipping?
Is it jumping out of gear?
How high in the pedal travel is the clutch catching?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
mazda gtx
Novice
Sep 19, 2009, 6:13 AM
Post #3 of 8
(1494 views)
|
|
Re: manual transmission
|
Sign In
|
|
when disengaging clutch pedal car wants to move but slips as clutch is fully disengaged not jumping out of gear
|
|
| |
|
|
mazda gtx
Novice
Sep 19, 2009, 6:16 AM
Post #4 of 8
(1493 views)
|
|
Re: manual transmission
|
Sign In
|
|
clutch catches just as the clutch pedal leaves floor
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 19, 2009, 7:28 AM
Post #5 of 8
(1487 views)
|
|
Re: manual transmission
|
Sign In
|
|
Did you replace the clutch disc, pressure plate and throw out bearing?
Does it do this for all gears?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
mazda gtx
Novice
Sep 19, 2009, 12:47 PM
Post #6 of 8
(1481 views)
|
|
Re: manual transmission
|
Sign In
|
|
yes everything replaced aswell as flywheel got machined but did notice it was serverly but guy at that machined it did not say anything about cracks some cracks still visible after being machined
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 19, 2009, 1:37 PM
Post #7 of 8
(1476 views)
|
|
Re: manual transmission
|
Sign In
|
|
Well, it's really not making anny sense. Everything your describing indicates a slipping clutch but I don't see how that would be possible avter replacing those parts unless you installed the wrong parts. It really needs to be looked into deeper.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
mazda gtx
Novice
Sep 19, 2009, 1:57 PM
Post #8 of 8
(1471 views)
|
|
Re: manual transmission
|
Sign In
|
|
could it be the fly wheel if the guy that machined might by the off chance was doin me a raw deal as cracks were still visible
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
