|
|
whiskeywarden
New User
Nov 19, 2011, 1:39 PM
Post #1 of 8
(3859 views)
|
Audi Exhaust Fix help
|
Sign In
|
|
My 1995 A6 Quattro wagon the part of the flange that is part of the pipe has rotted so it can not be reused. Instead of replacing the pipe ($$) I thought I would cut the flange off as well as the lip on the other pipe and replace it with an exhaust clamp or sleeve with c-clamps. Any pros or con thoughts on this?
1995 Audi A6 Quattro Wagon 180k miles2.8L
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Nov 19, 2011, 2:03 PM
Post #2 of 8
(3834 views)
|
Re: Audi Exhaust Fix help
|
Sign In
|
|
The old soup can repair. Wont last but could (maybe) could be fixed by an exhaust specialty shop and put the new right parts welded on. At best it's still a patch job but would/should cost less than the whole parts it should get but don't expect even that to last too long either. Just my 2 cents and probably others, T
|
|
| |
|
whiskeywarden
New User
Nov 19, 2011, 2:07 PM
Post #3 of 8
(3828 views)
|
Re: Audi Exhaust Fix help
|
Sign In
|
|
The replacement part is $345 (it's an Audi). I saw that other model Audi's have these exhaust clamps that slide over the two pipes and just clamps down over it with 2 screws. That part is about $4.00. I know it is just a patch but the car has 180k and was given to me free.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 19, 2011, 2:17 PM
Post #4 of 8
(3826 views)
|
Re: Audi Exhaust Fix help
|
Sign In
|
|
Which flange do you mean? The one between the muffler and resonator or one of the flanges after the catalytic converters? If the pipe isn't all rotted out, a muffler shop should be able to fix that for you. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 19, 2011, 2:17 PM)
|
|
| |
|
whiskeywarden
New User
Nov 19, 2011, 2:27 PM
Post #5 of 8
(3817 views)
|
Re: Audi Exhaust Fix help
|
Sign In
|
|
It is the one right after the cats. Plus there is a cap that has blown apart on the cat that I have to replace.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 19, 2011, 2:41 PM
Post #6 of 8
(3813 views)
|
Re: Audi Exhaust Fix help
|
Sign In
|
|
I'm looking at the diagram of the stock exhaust. I don't know which cat has the broken flange, but as you stated there is a pipe with two clamps where the resonator pipe and pipe after the converter go together. If the pipe broke off right at the converter can, your going to have to replace the cat and pipe. You should still swing into a muffler shop and have them evaluate what could be done safely and cost effectively to resolve your problem. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
whiskeywarden
New User
Nov 20, 2011, 4:49 PM
Post #7 of 8
(3776 views)
|
Re: Audi Exhaust Fix help
|
Sign In
|
|
Here are the attached pictures of my issue The part needing to be replaced is over $300. In newer models the connections are connected with the exhaust clamps. They are a sleeve with 2 screw downs on the top. (hard to explain) It just seems easy to cut the flange right out and cover the connection with a sleeve. Reduced 69% 314 x 235 (29.48K) Reduced 69% 314 x 235 (32.66K) Reduced 69% 314 x 235 (29.31K)
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 20, 2011, 4:59 PM
Post #8 of 8
(3773 views)
|
Re: Audi Exhaust Fix help
|
Sign In
|
|
Are those pictures of the flange before one of the converters? The pictures are very small and don't render too much detail, but it looks like the studs are broken. You can torch those out and use bolts and nuts to hold the flange together. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 20, 2011, 5:00 PM)
|
|
| |
|