|
|
|
theft protection car not starting
|
|
|
| |
|
|
ezzy
Novice
Dec 20, 2010, 8:23 PM
Post #1 of 11
(2650 views)
|
|
theft protection car not starting
|
Sign In
|
|
1991 Cadillac Sevelle car won't start has security pelet on key, theft protection comes
up on computer say's to wait 3 min's then try an start again. Did that about 15 times
mesg keeps popping up. How do I overide or disconect this handy option since it's
stranded in a parking lot only have 1 key & I guess its wore down.
Thanks
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 20, 2010, 8:25 PM
Post #2 of 11
(2640 views)
|
|
Re: theft protection car not starting
|
Sign In
|
|
PASSKEY SENSOR BYPASS
The most common failure in these is the sensor in the ignition lock that reads the key pellet. That would mean replacing the ignition lock with a sensor included.
That sensor can be bypassed. You would need a digital ohmmeter to measure the resistance of the pellet in the key. Now go to Radio Shack and buy a resister of the exact same value as the key pellet. Go to the base of the steering column and locate the two thin white wires that go up to the sensor. Cut the two wires and solder the resister between the two ends coming from the harness. This will permanently bypass the sensor but not the rest of the system.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
ezzy
Novice
Dec 20, 2010, 8:32 PM
Post #3 of 11
(2634 views)
|
|
Re: theft protection car not starting
|
Sign In
|
|
Thanks
|
|
| |
|
|
ezzy
Novice
Dec 20, 2010, 8:57 PM
Post #4 of 11
(2627 views)
|
|
Re: theft protection car not starting
|
Sign In
|
|
Hey Hammer, What if I just cut those 2 white wires will it start?
I'm just trying to get it home before it gets stripped.
Thanks
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Dec 20, 2010, 9:13 PM
Post #5 of 11
(2627 views)
|
|
Re: theft protection car not starting
|
Sign In
|
|
The ghetto method. This requires 2 keys, the 2nd doesn't need a pellet, it just needs to be able to turn the lock cyl.
Find the 2 correct wires HT posted. There will be a small connecter between the lock cyl & harness going to the module. Disconnect the connector & cut it on the cyl side with at least 3 to 4" of wire to work with. Tape/glue/use a stick gum to attach the wire to each side of the pellet of the key and plug it back into the main harness. Using the other key, start the car.
If the problem was broken wires in the lock cyl (70 to 80% of time the problem) the car should start & run.....
|
|
| |
|
|
ezzy
Novice
Dec 20, 2010, 9:25 PM
Post #6 of 11
(2620 views)
|
|
Re: theft protection car not starting
|
Sign In
|
|
Thanks McGiver your the man Hammer.
|
|
| |
|
|
ezzy
Novice
Dec 21, 2010, 3:59 PM
Post #8 of 11
(2606 views)
|
|
Re: theft protection car not starting
|
Sign In
|
|
I got a 1.8 of key pellet, that sound right to you are I'm I doing something wrong.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 21, 2010, 4:35 PM
Post #9 of 11
(2602 views)
|
|
Re: theft protection car not starting
|
Sign In
|
|
Here are all the possible choices
Yours would seem to match the 1.870
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Dec 21, 2010, 4:36 PM)
|
|
| |
|
|
ezzy
Novice
Dec 21, 2010, 5:28 PM
Post #10 of 11
(2595 views)
|
|
Re: theft protection car not starting
|
Sign In
|
|
Thank you Sir.
|
|
| |
|
|
oxracing
User
Jan 18, 2011, 10:39 AM
Post #11 of 11
(2510 views)
|
|
Re: theft protection car not starting
|
Sign In
|
|
Hammer is right on with his advise, have done this hundreds of time to these vehicles, also the 2 small wires are usually encased in a orange sheath. and they are very very small
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
