|
|
66fairlane ragtop
New User
Sep 10, 2012, 7:43 AM
Post #1 of 10
(2549 views)
|
|
heater blower motor prob
|
Sign In
|
|
I have a 66 fairlane convt. and i am having problems with my heater blower motor. Is there a resistor the I can check or something else I can check. I dont really want to take out the heater box If I dont have to. Any suggestions will be greatly appreciated.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Sep 10, 2012, 11:31 AM
Post #2 of 10
(2526 views)
|
|
Re: heater blower motor prob
|
Sign In
|
|
What is it doing if at all or just some speeds? Not many from plain memory but similar Fords were pretty straight forward nuts and bolts, cables etc.,
T
|
|
| |
|
|
66fairlane ragtop
New User
Sep 10, 2012, 11:53 AM
Post #3 of 10
(2520 views)
|
|
Re: heater blower motor prob
|
Sign In
|
|
It does not do anything. You can feel the heat, but when you turn on the blower it does not blow. I thought if there was a resistor or a fuse somewhere I could check first then I could do that before i took it all out. It is a job to take the heater box out done it before.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Sep 10, 2012, 12:29 PM
Post #4 of 10
(2515 views)
|
|
Re: heater blower motor prob
|
Sign In
|
|
If no other or better help on archives out there and I do and will go search an old paper SERVICE TRADE Chiltons - (excellent back then) but just check that power gets to the motor with a plain test light. Then check that body of motor is ground back powering the test light. If yes to those checks, give the body of motor if accessible a mild whack when it should be running and it might start right up. If so, let me know as I think you can take those motors apart with some know how and clean up brushes, check how worn etc.
If fuses good and power gets to motor and still wont run bet you can find one. Also bet replacement wont come with the squirrel cage. Just take a hard look to see if holding nut for those are reverse threaded if it gets to that - many were,
T
|
|
| |
|
|
66fairlane ragtop
New User
Sep 10, 2012, 12:48 PM
Post #5 of 10
(2509 views)
|
|
Re: heater blower motor prob
|
Sign In
|
|
Thanks for the help. I will try and let you know what happens.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Sep 10, 2012, 1:33 PM
Post #6 of 10
(2503 views)
|
|
Re: heater blower motor prob
|
Sign In
|
|
Let us know and I will look up nice diagrams as needed if needed at all - on paper book so need to figure out how to post that?
T
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Sep 10, 2012, 4:10 PM
Post #7 of 10
(2493 views)
|
|
Re: heater blower motor prob
|
Sign In
|
|
By chance did Ford put the controls on the ground side Tom? I don't know about the older cars but the heavy trucks put the heater controls on the ground side. If you have 12v at the fan, ground the ground wire. Fan should run at full speed regardless of switch postion.
|
|
| |
|
|
66fairlane ragtop
New User
Sep 10, 2012, 6:57 PM
Post #8 of 10
(2489 views)
|
|
Re: heater blower motor prob
|
Sign In
|
|
It was the fuse. It was not getting a good connection. Thanks for the tips.
Theresa
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Sep 10, 2012, 7:16 PM
Post #9 of 10
(2488 views)
|
|
Re: heater blower motor prob
|
Sign In
|
|
thanks for posting the fix
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Sep 10, 2012, 11:30 PM
Post #10 of 10
(2481 views)
|
|
Re: heater blower motor prob
|
Sign In
|
|
Yes - Thanks for the fix. Watch glass fuses. Q-Tip w WD-40 or anywhere they connect. Can still find those and a plastic tool to remove/replace those.
Done for now but watch for Mid 60s give or take that for fan speed might be done right at the switch itself. Other dash things could be 12v source but run thru a resistor down to 6v still in some,
Tom
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
