|
|
kev4418
New User
Jul 7, 2012, 11:18 AM
Post #1 of 2
(4701 views)
|
i only have one spark i have changed the other coil that wasnt working but stillno spark what else could it be
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 7, 2012, 3:41 PM
Post #2 of 2
(4665 views)
|
|
Re: kawasaki gpz305
|
Sign In
|
|
I'd make sure each coil has power to it with the ignition turned on. If it has power, then you need to test to see if the ignition module is controlling the coil ground. You can do this with a 12 volt test light connected to battery positive and the tip touching the lead of the wire at the coil going back to the ignition module. When the engine cranks the light should be flashing rapidly.
If it doesn't flash, the coil is good, and there is battery power to the coil, more than likely you have an open circuit in the wiring from the coil to the module or the module is faulty.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jul 7, 2012, 3:44 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 