Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









2005 dakota Fuel Tank


Search for (search options)
 



bigl
User

Aug 12, 2011, 7:57 PM

Post #1 of 10 (4110 views)
2005 dakota Fuel Tank Sign In

I have a 05 Dodge Dakota 6 cyl ext cab pick-up. I have a hole in my fuel line, went to Dodge today only to be told that they are on national backorder, fuel lines will not be available until 9/20/11. I need to make a repair in the meantime. I need to drop the tank, are there any pointers I need or should be aware of when removing the tank? Any instructions would be very much appreciated, thanks.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Aug 12, 2011, 9:02 PM

Post #2 of 10 (4084 views)
Re: 2005 dakota Fuel Tank Sign In

Ask, particularly NAPA for a repair kit if a line has a problem,

T



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Aug 13, 2011, 3:05 AM

Post #3 of 10 (4070 views)
Re: 2005 dakota Fuel Tank Sign In

They make a repair kit for pressing fittings into that plastic line but the kit is around $200'.

Repair kit



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



bigl
User

Aug 13, 2011, 4:25 AM

Post #4 of 10 (4066 views)
Re: 2005 dakota Fuel Tank Sign In

Thanks Tom, the Dodge dealer told me to use some injection hose and injection clamps as a temporary fix. I'll inquire at NAPA this morning. Do I need to disconnect the battery before I drop the tank? Anything I need to know about dropping the tank or is it pretty much straight forward? Thanks foryour help,


bigl
User

Aug 13, 2011, 4:25 AM

Post #5 of 10 (4065 views)
Re: 2005 dakota Fuel Tank Sign In

Thanks, will look into a repair kit.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Aug 13, 2011, 4:29 AM

Post #6 of 10 (4062 views)
Re: 2005 dakota Fuel Tank Sign In

No, I would definitely NOT try to use clamps and the dealer had no business suggesting that. I'm sure that came from one of their service advisers that isn't a tech and shouldn't be giving advice like that. That would be extremely dangerous. There is far too much pressure to trust a clamp.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Aug 13, 2011, 9:08 AM

Post #7 of 10 (4055 views)
Re: 2005 dakota Fuel Tank Sign In

As HT just said - no plain clamps! The proper repair kit should be available and done right not hacked,

T



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Aug 13, 2011, 9:17 AM

Post #8 of 10 (4052 views)
Re: 2005 dakota Fuel Tank Sign In

$161 for the repair kit isn't a bad price considering how much it would cost to buy another vehicle because the temp rubber hoses with clamps didn't hold and blew gas all over the hot exhaust causing the vehicle to burn to the ground. You could probably turn around and sell the kit to someone else and get some or all of your money back.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.


bigl
User

Aug 14, 2011, 5:57 PM

Post #9 of 10 (4028 views)
Re: 2005 dakota Fuel Tank Sign In

Thanks for all the advice!


qlty
New User

Sep 2, 2011, 2:36 PM

Post #10 of 10 (3898 views)
Re: 2005 dakota Fuel Tank Sign In

I know your post is a bit old but I have a 95 v6 Dakota and was able to loosen only the 4 bolts on the passenger side and remove the 4 bolts on the driver side and the 4 screws at the filler cap and disconnect any tail lite wires.Then you can carefully lift the bed up and place timbers to hold it and have access to the fuel pump and lines.A lot easier that dropping the tank and you dont have to empty the tank.I am still having prob replacing the rusted steel lines on mine.Let us know how you made out on your problem.






 
 
 






Search for (options) Privacy Sitemap