Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









97 chevy silverado door K 1500


Search for (search options)
 



mountaindew
User

Jan 22, 2013, 12:48 PM

Post #1 of 7 (4281 views)
97 chevy silverado door K 1500 Sign In

My drivers side door will not open from the inside.We took the door panel off and both rods are connected.I didnt know what to do so we put it back together and now the outside wont open either.How can I get it open to see what that problem is


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Jan 22, 2013, 6:54 PM

Post #2 of 7 (4244 views)
Re: 97 chevy silverado door K 1500 Sign In

Usually what happens on those is the inside door handle lever bends. When it does that you have to pull harder on it to open the door. Eventually it will break from being pulled and bending too much. Replacing the inside door handle usually solves that issue.

As for the outside door handle they usually break and the handle flops around. Did you make sure the lock rod was installed properly?

Try pulling the inside door handle further back. You might get lucky and open the door.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Jan 22, 2013, 6:55 PM)


mountaindew
User

Jan 23, 2013, 12:39 PM

Post #3 of 7 (4217 views)
Re: 97 chevy silverado door K 1500 Sign In

I tried everything and wont move any.When I pull up on the outside handle it seems like it is locked.I pulled the inside back as far as it will go and nothing


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Jan 23, 2013, 4:43 PM

Post #4 of 7 (4203 views)
Re: 97 chevy silverado door K 1500 Sign In

If you use the key on the outside door lock, does it feel like the lock cylinder rod is connected?





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.


mountaindew
User

Jan 23, 2013, 5:54 PM

Post #5 of 7 (4192 views)
Re: 97 chevy silverado door K 1500 Sign In

It feels the same way it would if it was locked


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Jan 23, 2013, 6:03 PM

Post #6 of 7 (4188 views)
Re: 97 chevy silverado door K 1500 Sign In

Hmm... your going to have to remove the door panel to get in there and see what happened. There is a chance you may end up breaking the panel getting it out. Haven't done an inop latch on one of those that requires getting the panel off with the door closed, so can't really give you any advice other than if you can pry the top of the panel from the window belt molding, you might be able to get it back enough to get in there.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jan 25, 2013, 2:52 AM

Post #7 of 7 (4170 views)
Re: 97 chevy silverado door K 1500 Sign In

For whatever reason a door won't open I have no luck at not breaking sometime to get in there.

I think most of that panel will just pull off, just plastic zip things, not certain but likely - T







 
 
 






Search for (options) Privacy Sitemap