Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

1977 f250 with 400 engine wont turn over


  Email This Post



jackj65
Novice

Jan 30, 2013, 5:16 PM

Post #1 of 8 (4028 views)
1977 f250 with 400 engine wont turn over Sign In

Had to jump to start. Replaced battery starter regulator selinoid now it wont turn over even with a jump but i have power.1977 f250 custom with the 400 engine[mad]


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Jan 30, 2013, 5:22 PM

Post #2 of 8 (4023 views)
Re: 1977 f250 with 400 engine wont turn over Sign In

Does the fender mounted solenoid clack when you attempt to crank the engine?





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.


jackj65
Novice

Jan 30, 2013, 6:15 PM

Post #3 of 8 (3982 views)
Re: 1977 f250 with 400 engine wont turn over Sign In

No


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jan 30, 2013, 6:17 PM

Post #4 of 8 (3979 views)
Re: 1977 f250 with 400 engine wont turn over Sign In

You replaced the solenoid. Did you get all the wires back in the correct place?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



jackj65
Novice

Jan 30, 2013, 6:18 PM

Post #5 of 8 (3972 views)
Re: 1977 f250 with 400 engine wont turn over Sign In

Yes doubled and triple checked


re-tired
Veteran / Moderator
re-tired profile image

Jan 30, 2013, 7:48 PM

Post #6 of 8 (3956 views)
Re: 1977 f250 with 400 engine wont turn over Sign In

buy a test light . test for power one of the large posts. when key is turned to start see if power is on small post. post back


LIFE'S SHORT GO FISH


jackj65
Novice

Jan 30, 2013, 7:49 PM

Post #7 of 8 (3953 views)
Re: 1977 f250 with 400 engine wont turn over Sign In

Will do


jackj65
Novice

Feb 1, 2013, 3:11 PM

Post #8 of 8 (3902 views)
Re: 1977 f250 with 400 engine wont turn over Sign In

The selonoid was good but one of the bolts holding it on wasnt grounding, on the firewall where one of the two bolts went.had a small crack in it and thats why it wouldnt ground. I welded the crack and put in new bolts and it fired right up. I could not have figured it out without your help.thanks for being there for me.






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap