Latest Forum Post
Nembutal, Amphetamin, Crystal Meth kaufen (ordermcatonline@gmail.com)
https://opioidsmeds.com E-Mail: sales@op...
Buy Dilaudid,Oxycodone,Adderall (ordermcatonline@gmail.com)
https://opioidsmeds.com Email: sales@op...
comprar éxtasis MDMA, comprar efedrina en polvo (ordermcatonline@gmail.com)
https://opioidesmeds.com Correo electró...
Compre Nembutal, anfetamina, metanfetamina (ordermcatonline@gmail.com)
https://opioidsmeds.com E-mail: sales@op...
comprar éxtasis MDMA, comprar efedrina en polvo https://opioidesmeds.com
https://opioidesmeds.com Correo electró...
mephedrone 4mmc till salu,Köp mephedrone 4mmc online (ordermcatonline@gmail.com)
https://opioidsmeds.com E-post: sales@op...
Drive Shaft Repair
I have a 2015 Chevy Traverse AWD. The fr...
2006 Toyoto Camry XLE Driver Side Electric Window Trouble
Hello, Looking for a little brain help ...
Tierod end change caused some kind of leak
Hello so I just took my car to the nearb...
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
When I bought this car in summer 2023, a...
|
|
bryanmp
New User
Nov 3, 2005, 11:41 PM
Post #1 of 3
(1900 views)
|
Need help in changing lower ball joints on a 96 cavalier any help on this would be great thanks
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Nov 4, 2005, 2:33 AM
Post #2 of 3
(1896 views)
|
I suggest you farm that one out. Big buck tools needed and an alignment. A good shop will do this and align it all at once using some $50,000 bucks in equipment. The hardest part might be finding a good shop for this. It'll cost you some but save you a lot of aggrevation. If you still want to do this hit back I'll see what I can do. - T
|
|
| |
|
DanD
Veteran
/ Moderator
Nov 4, 2005, 5:04 AM
Post #3 of 3
(1891 views)
|
The lower ball joints on these things are riveted to the control arm and can be a bit of a bugger to separate. You’re going to have to drill; chisel and hammer to get the rivets out and I’ve seen qualified technicians destroy a control arm in the process. It’s not an impossible job but like Tom said, for an hour’s worth of labour that you’re going to pay a shop to do this, is it worth the aggravation? Dan. Canadian "EH"
|
|
| |
|